template irg4ph40u c g e
#*************************************
#      Model Generated by MODPEX     *
#Copyright(c) Symmetry Design Systems*
#         All Rights Reserved        *
#    UNPUBLISHED LICENSED SOFTWARE   *
#   Contains Proprietary Information *
#      Which is The Property of      *
#     SYMMETRY OR ITS LICENSORS      *
#Commercial Use or Resale Restricted *
#   by Symmetry License Agreement    *
#*************************************
# Model generated on March 6, 2001
# MODEL FORMAT: Saber
# Symmetry IGBT Model (Version 1.0)
electrical c,g,e
{
# BODY_BEGIN
# Default values used in MS:
# The voltage-dependent capacitances are
# not included. Other default values are:
#   LD=0 CBD=0 CBS=0 CGBO=0
spm..model ms=(type=_n,level=1,
vto=5.67,kp=0.0371782,lambda=10,rs=1e-06,
rd=1e-06,cgso=1.8363e-05)
spq..model qsub=(type=_p,
is=1e-17,bf=4439.9,nf=1.5,vaf=8377.48,
ikf=13256.2,ise=8.25269e-08,ne=2.14196,br=0.997604,
nr=1.48165,var=13592,ikr=1000,isc=1.82728e-10,
nc=1,rb=0.0001,irb=1e-05,rbm=1e-05,
re=1e-08,rc=1e-08,xtb=50,xti=0,
eg=0.5,cjc=3.58729e-09,vjc=0.658001,mjc=0.9,
cje=7.17457e-08,vje=456.947,mje=0.9,tf=5.84317e-07)
# Default values used in DCAP:
#   RS=0 EG=1.11 XTI=3.0 TT=0
#   BV=infinite IBV=1mA
spd..model dcap=(is=1e-32,n=50,
cjo=3.60029e-09,vj=0.4,m=0.9,fc=0.5)
# Default values used in DL:
#   EG=1.11 XTI=3.0 TT=0 CJO=0
#   RS=0 BV=infinite IBV=1mA
spd..model dl=(is=1e-10,n=0.4)
spm.m1 n7 n6 n4 n4 =model=ms,l=100u,w=100u
spq.q1 n4 n7 c c=model=qsub,off=1
spr.rds n7 n4 =1e8
spr.rer n4 e =0.0005
spr.rg n6 g =8.57745
spr.rl n10 n11 =1
spd.d2 n12 n11 =model=dcap
spd.d3 0 n11 =model=dl
spv.vfi2 n12 0 =0
spf.fi2 n6 n7 i(spv.vfi2) =-1
spe.ev n10 0 n7 n6 =1
spc.cap n10 n13 =2.17382e-08
spr.rcap n10 n14 =1
spd.d4 0 n14 =model=dl
spv.vfi1 n13 n14 =0
spf.fi1 n6 n7 i(spv.vfi1) =-1
}