CHiL MultiPhase ICs MOSFET Drivers & Power Devices
International Rectifier MOSFET drivers are designed to work seamlessly with the International Rectifier multiphase PWM controllers to provide a well matched VR solution offering flexibility in power train component selection. The drivers switch both high and low side FETs of a synchronous buck configuration from one single device package.
- Innovative features enable improvements in VR efficiency
- Unique fast tri-level PWM signaling scheme for rapid switching & disable of MOSFETs and fast phase shedding
- Flexibility in gate drive voltages and fast transition times
- Highly reliable adaptive anti-shoot-through circuit to minimize the dead time and prevent cross conduction of the external FETs
- Accurate, differential comparators to measure phase and gate voltages, compared to industry standard self-biased single ended comparators
- Design ensures that MOSFET body diode conduction time is reduced
- Single PWM pin to disable the device
- Eliminates the need for extra trace routing found in traditional drivers using an ODB pin and allows control over each phase
- Large sink current capability for the low side MOSFET to reduce the possibility of shoot-through
- Unique anti-ringing blanking logic
- Ensures that ringing nodes do not create false gate drive triggering
- Available in thermally enhanced DFN packages for higher switching frequency applications
The VR designer can select a driver optimized for the end application and the type of MOSFETs used in the power train.
Part Number |
CHL8510 |
IR3537 |
CHL8515 |
CHL8550 |
CHL8505 |
VCC |
12V |
12V |
5V |
5V |
5V |
V_DRIVE |
4.5-12V |
4.5-12V |
4.0-12V |
4.0-12V |
5V |
VGD* |
yes |
yes |
yes |
yes |
- |
System Voltage |
5V to 12V |
5V to 12V |
5V to 22V |
5V to 22V |
5V to 22V |
Interface |
ATL, Tristate |
ATL, Tristate |
ATL |
ATL |
ATL |
HS Source/ Sink [A] |
3.0/4.0 |
3.0/4.0 |
2.0/2.0 |
2.0/2.0 |
1.5/1.5 |
HS Source/ Sink [Ω] |
1.6/0.6 |
1.6/0.6 |
1.0/1.0 |
1.0/1.0 |
1.5/1.5 |
LS Source/ Sink [A] |
4.0/6.0 |
4.0/6.0 |
2.0/4.0 |
2.0/4.0 |
1.5/3.0 |
LS Source/ Sink [Ω] |
1.5/0.4 |
1.5/0.4 |
1.0/0.6 |
1.0/0.6 |
1.4/0.0 |
Boot Diode |
yes |
yes |
yes |
yes |
yes |
OverTemp |
- |
- |
yes |
- |
- |
Package/Pins |
DFN10 |
DFN10 |
DFN10 |
DFN10 |
DFN10 |
* - Variable Gate Drive is used to enhance efficiency as the load current changes
The following MOSFET drivers offer cost/performance tradeoffs in footprint compatible packages. Please refer to the data sheet for exact pins, layout and features.
- IR3537 and CHL8510
- CHL8515, CHL8505 and CHL8550
|